The DNCT2B Bock Feeder/Sensor module feeds rail power to, and senses occupancy on, two blocks. Requires one open port on a DNCTA Interface.
The DNCT2B Bock Feeder/Sensor module serves block feeders in pairs. The boards should be placed near track feeders, which are directly attached to the boards. Connect the module to the main rail power bus and you are ready to go. Using the Configurator App, detect the hardware and enable block occupancy detection on the node. LCOS does the rest!
The BOD system can reliably detect (See the LCOS Manual for more information about detection capabilities and limits) loads as small as a pair of 10k resistor wheelsets, a single LED or Incandescent bulb, or a DCC locomotive idling with all lighting and functions turned off.